Видео

Love that mobile J pole. I have been a ham since 1965 and never made one. My ringo ranger got broken in a storm and I think I will build one. They all seem to have wonderful SWR over the band. de WB7ORB

When I did this I found that the half inch lip was a narrow on my test cut. So I made a free-hand pass with the router to make the lip bigger and the opening smaller. Edit: I did not bother bolting mine to the table so I can pull it out and change the speed, the lift sits inside of a box with a dust collection port.

so I just did the exact same thing with mine. What I was wondering is I installed a 1/2" bit and cannot loosen it to get it out, I didn't want to damage the neralling so I was hoping for an easy answer, I guess I am going to have to grab the neralling with a big pair of channel locks and go for it.

Very useful. Kinda fun too. Thank you!

some great tips there! Thank you

Can't get the cap

Would it be better to use a metal on metal like the diamond bit or a metal file type bit such as used in the automotive grinding tools every time I use the orange or the gray grinding wheels the material eats up the wheel so those types of stones really aren't that effective at removing lots of metal

Good vid. Where can I get those small T-Track clamps you showed? I have searched but cannot find them.

I hope i can see what you are doing

Great video, would it help to bleed air out if the unit was heated to making fluid less viscus? thanks

Thanks very much for your video. Could you please tell me what diameter and cutting length your pattern bit was to cut the final pocket from the template. It looks like 3/4" diameter and 3/4" cutting length in the video but wasn't sure. Thanks.

that's pretty awesome, I'm new ham radio and just got my call sign about a month ago, I'm also from Pa I live in a small town near Somerset. im going to build one and who knows I might be talking to ya soon

Thank you.

Looks well made would love to make it but being a disabled first responder with no drill press I guess this one's out for me. But nice work Matt I bet it works awesome 👍😎

I did one that is 4x4 feet with 4 turns. It worked quite well. My method involved no drilling. or glue I suggest others copy the idea. Imagine you are holding some PVC pipe in your left hand wit a T on top of it. You pass the wire on the side close to you below the T loop it around the T and to behind the pipe in your hand. The result is a wire that doesn't want to slip off the T. This is how I did the 4 corners of the frame. It works fine.

I trust SW more than the internet pal. Good production thank you.

Can we get a close up photo of the driven element?

What you suggest for chainsaw teeth crome teeth tried pink useless

The longer you live the more you realize how useful PVC pipes are

Where is the promised update video? What’s your desk look like now 4 years later?

Let’s go Steelers

The units of measurement in the metric system are millimetres meters and kilometres you should abandon centimetres as ancient history.

I have had this sander for over 10 years used occassionally i even forgot and left it outside in a light rain once it is a bit underpowered and as stated the v belt tension is super critical. You need some basic mechanical and trouble shooting skills to set up these imported luckily there are Utube how to videos on how to set up and used most any H/F corded power tools. Lately Harbor Freight has risin a lot of its prices and a lot of WEN tool which are a notch higher in qualiy and service. For our budget minded Candian friends buying WEN corded tools off Amazon might be a viable option.

I will admit, as a bigger guy myself, I held my breath when you sat in that tiny chair hihi! Good job on the video Matt, you're helping get Callum a new customer here. I'm really close to pulling the trigger on a Rapide.

Subscribed, thank you... How do you log a P2P hunter who is at more than one park?

Radios always fascinated me. I love the way radio works.

A common saying used to describe the proper power pole orientation is “red right, tongue top” where “tongue” refers to the metal contact inside the plastic shell. Thus, looking at the open end of the connector, just as you do, the red goes on the right and oriented such that the tongue is at the top of the opening. I suppose there are any number of ways to describe the orientation.

You helped me so much thank you

Not for IOS?? Wish you had mentioned that in the beginning. Thanks

If I may make a suggestion. At the beginning of this video you could mention that this video is part 2 of a 2 part video. Part 1 was installing a new side extension to accept the future router lift.

@ Mattheere. Absolutely. Ty

Very disappointed you did not start the video with the install of the wing extension onto your table saw.

7 year old video, but still one of the best and most informative JessEm install overviews.

Fabrication steps very clever and well explained.

I'm sorry but this is a piece of China shit.

A video worth sharing.

can you share the specs of the humidifier? and are you connected with 220v?

Bought a commercial little medium wave loop some time ago. They attach two wires to the cap and bring the end via a phono plug into the receiver. Works from roundabout 500kHz up to about 3.8Mhz. Neat construction your loop Matt, thanks for the video!!!

doing this mod would i be able to use it for auto body on thin sheet metal or would it be too hot

nice video! looks like something you should do before heading out to the park

Thank you sir

Please help just got mine put together turned it on an the chuck wobbles bad what can I do

i think i ll disconect the fan and place a bigger one and quiet on the top ,in the the place were the vents are sucking the air out..

Watched this whole video thinking i was going to learn how v to build a CB antennna LMFAO

Matt huge thank for this - I had this exact question requiring an answer and you've done just that to perfection!

Great job for AM Dx logging & listening.....With a band Full of Active night Time stations you Just Can't beat the Std MW Broadcast Band for Real long distance reception with Simple cheap Equipment ! ......FM maxes Out at 'bout 150 miles & Google Streaming Isn't real RF radio......How about Comparing This diy Frame Loop design to a Long Diy Ferrite Rod show down Video ??

2 meters in Alabama is dead. I can dial up a repeater at 8AM and hear nothing until 5PM when the drive time happens (and maybe hear two or three QSO happen) . Then it is dead until morning drive time comes around and the same two or three QSO happen again, same people, same subjects. Boring !! I get more activity on 2 meter SSB than on FM repeaters. Why bother with 2 meter FM anymore ???

The powder post beetles don't get nourishment from the wood but they get it from the fungus in the wood. Control the fungus by low moisture content.

Never ever use pressure treated for bird house! Take this video off!!

The gear assembly for the table raising and lowering, wants to pull in on the shaft when raising and pull the handle off the shaft (the set screw is some small mm philips screw for the handle and still wants pull the handle off even when tightened), when lowering the shaft wants to push out. Both ways want to bind the gears and is very hard to turn to operate the table position. Not happy with this problem and calling HF about this. 15 Jan 24. The table handle assembly is now set at a 45 degrees to the table so there is no table interference.